next up previous contents
Next: About this document ... Up: Seismic Sensors and their Previous: Acknowledgments

Bibliography

natexlab#1#1

Beauduin et al. 1996
Beauduin, R., Lognonné, P., Montagner, J. P., Cacho, S., Karczewski, J. F. & Morand, M., 1996.
The effects of the atmospheric pressure changes on seismic signals, Bull. Seism. Soc. Am., 86(6), 1760-1769.

Berlage Jr. 1932
Berlage Jr., H. P., 1932.
Seismometer, vol. 4 of Handbuch der Geophysik (ed. B. Gutenberg), chap. 4, pp. 299 - 526.
Gebrueder Borntraeger Verlag, Berlin.

Gal'perin 1955
Gal'perin, E. I., 1955.
Azimutal'nij metod sejsmicekich nabludenij.
Gostoptechizdat, 80 pp.

Gal'perin 1977
Gal'perin, E. I., 1977.
Polyarizatsionnyi metod seismicheskikh isledovanii.
Nedra Press, Moscow.

Holcomb 1989
Holcomb, G. L., 1989.
A direct method for calculating instrument noise levels in side-by-side seismometer evaluations.
Open-file report 89-214, U. S. Geological Survey.

Holcomb 1990
Holcomb, G. L., 1990.
A numerical study of some potential sources of error in side-by-side seismometer evaluations.
Open-file report 90-406, U. S. Geological Survey.

Holcomb & Hutt 1992
Holcomb, L. G. & Hutt, C. R., 1992.
An evaluation of installation methods for STS-1 seismometers.
Open-file Report 92-302, U. S. Geological Survey, Albuquerque, New Mexico.

Jones & Richards 1973
Jones, R. V. & Richards, J. C. S., 1973.
The design and some applications of sensitive capacitance micrometers, Journal of Physics E: Scientific Instruments, 6, 589-600.

Knothe 1963
Knothe, C., 1963.
Verbesserte Auswertung tiefenseismischer Beobachtungen durch Verwendung von Mehrkomponenten-Stationen.
Freiberger Forschungshefte C149.

LaCoste 1934
LaCoste, L. J. B., 1934.
A new type long period seismograph, Physics, 5, 178-180.

Melton & Kirkpatrick 1970
Melton, B. S. & Kirkpatrick, B. M., 1970.
The symmetric triaxial seismometer - its design for application in long-period seismometry, Bull. Seism. Soc. Am., 60(3), 717-739.

Mitronovas & Wielandt 1975
Mitronovas, W. & Wielandt, E., 1975.
High-precision phase calibration of long-period electromagnetic seismographs, Bull. Seism. Soc. Am., 65(2), 441-424.

Oppenheim & Schafer 1975
Oppenheim, A. V. & Schafer, R. V., 1975.
Digital Signal Processing.
Prentice-Hall International, London.

Oppenheim & Willsky 1983
Oppenheim, A. V. & Willsky, A. S., 1983.
Signals and Systems.
Prentice Hall, New Jersey, USA.

Pavlis & Vernon 1994
Pavlis, G. L. & Vernon, F. L., 1994.
Calibration of seismometers using ground noise, Bull. Seism. Soc. Am., 84(4), 1243 - 1255.

Peterson 1993
Peterson, J., 1993.
Observations and modelling of background seismic noise.
Open-file report 93-322, U. S. Geological Survey, Albuquerque, New Mexico.

Plesinger et al. 1996
Plesinger, A., Smeskal, M. & Zednik, J., 1996.
Automated preprocessing of digital seismograms: Principles and software.
Prague and Golden.

Riedesel et al. 1990
Riedesel, M. A., Moore, R. D. & Orcutt, J. A., 1990.
Limits of sensitivity of inertial seismometers with velocity transducers and electronic amplifiers, BSSA, 80(6), 1725 - 1752.

Rodgers 1968
Rodgers, P. W., 1968.
The response of the horizontal pendulum seismometer to Rayleigh and Love waves, tilt, and free oscillations of the earth, Bull. Seism. Soc. Am., 58, 1384-1406.

Rodgers 1969
Rodgers, P. W., 1969.
A note on the response of the pendulum seismometer to plane wave rotation, Bull. Seism. Soc. Am., 59(5), 2101-2102.

Rodgers 1992a
Rodgers, P. W., 1992a.
Frequency limits for seismometers as determined from signal-to-noise ratios. Part 1: the electromagnetic seismometer, Bull. Seism. Soc. Am., 82(2), 1071-1098.

Rodgers 1993
Rodgers, P. W., 1993.
Maximizing the signal-to-noise ratio of the electromagnetic seismometer: the optimum coil resistance, amplifier characteristics, and circuit., Bull. Seism. Soc. Am., 83(2), 561-582.

Rodgers 1994
Rodgers, P. W., 1994.
Self-noise spectra for 34 common electromagnetic seismometer/preamplifier pairs, Bull. Seism. Soc. Am., 84(1), 222-228.

Rodgers et al. 1995
Rodgers, P. W., Martin, A. M., Robertson, M. C., Hsu, M. M. & Harris, D. B., 1995.
Signal-coil calibration of electromagnetic seismometers, Bull. Seism. Soc. Am., 85(3), 845-850.

Scherbaum 1996
Scherbaum, F., 1996.
Of Poles and Zeros, Fundamentals of Digital Seismology.
Kluwer Academic Press.

Schuessler 1981
Schuessler, H. W., 1981.
A signalprocessing approach to simulation, Frequenz, 35, 174-184.

stuadmin@geophys.uni-stuttgart.de 1998
stuadmin@geophys.uni-stuttgart.de, 1998.
Station STU:a picture tour to the seismometer.
http://www.geophys.uni-stuttgart.de.

Trnkoczy 1998
Trnkoczy, A., 1998.
Guidelines for civil engineering works at remote seismic stations.
Application Note 42, Kinemetrics Inc., 222 Vista Av., Pasadena, Ca. 91107.

UCB 1997
UCB, S. L., 1997.
Guidelines for installing broadband seismic instrumentation.
http://www.seismo.berkeley.edu/ seismo/ bdsn/ instrumentation/ guidelines.html.

Wielandt 1975
Wielandt, E., 1975.
Ein astasiertes Vertikalpendel mit tragender Blattfeder, J. Geophys., 41(5), 545 - 547.

Willmore 1959
Willmore, P. L., 1959.
The application of the Maxwell impedance bridge to the calibration of electromagnetic seismographs, Bull. Seism. Soc. Am., 49(1), 99-114.

Willmore, P. L. (ed.) 1979
Willmore, P. L. (ed.), 1979.
Manual of seismological observatory practice.
Tech. Rep. SE-20, World data center A for solid earth geophysics, NOAA, Boulder, Colorado 80303, USA.


Erhard Wielandt
2002-11-08